Open-Source Design page: Difference between revisions
No edit summary |
No edit summary |
||
| (3 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
trunkCam is an open-source hardware project. If you would like to make your own, you will need: | trunkCam is an open-source hardware project. If you would like to make your own, you will need: | ||
* the parts from the Bill of Materials | * the parts from the [https://docs.google.com/spreadsheets/d/1cBpvzQr5q_kBL8JIbCuVbll7WQdTomYz7Iyf3H-uzQA/edit?usp=sharing Bill of Materials] | ||
* the 3D printed parts listed below | * the 3D printed parts listed below. Follow [[Print your own parts for a DIY build|this instructional guide to print your own]] | ||
The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | The design files for trunkCam are in Fusion, and are viewable and downloadable [https://artiswrong.autodesk360.com/g/shares/SH28cd1QT2badd0ea72b09c4bda8e03e7a87 at this link] | ||
3D printable parts: | |||
*[https://www.dropbox.com/scl/fi/nhba4fyzemnofcnn25k9v/spine.stl?rlkey=vkjyh6xm5edj83zc38mt15h7f&dl=0 Spine] | |||
*[https://www.dropbox.com/scl/fo/35qyq8swjdmjm9aexrpgb/AIFEZDlOs5cbNKS9yfUb09g?rlkey=q2xplfyatjtkbfyulckbh5wwp&dl=0 Endcap] | |||
*[https://www.dropbox.com/scl/fi/fytbg9tymygbl1bh1w3ju/clamping-arm.stl?rlkey=n1sd80l2pjr6ynch9e16l261n&dl=0 Clamping Arm] | |||
*[https://www.dropbox.com/scl/fi/8ax8vzx473ua6b33oxz8q/Tensioning-Cap.stl?rlkey=l6vl8kjd8qrk2b1bqnt3h8fd1&dl=0 Tensioning Cap] | |||
*[https://www.dropbox.com/scl/fi/cldlrd4b36p1qducs5qeb/Capstan-Cap.stl?rlkey=siy05is7p7fekk11ys4pz5r3m&dl=0 Capstan Cap] | |||
*[https://www.dropbox.com/scl/fi/lg43cgystblrcfejwm9hr/Capstan.stl?rlkey=lw0n8m6vclv3rcen0zkv3jznv&dl=0 Capstan] | |||
*[https://www.dropbox.com/scl/fi/qmfn8ch0mbx0xh9hj39l3/Handle.stl?rlkey=1f1cnj4letr3njx6c5a2skpzn&dl=0 Handle] | |||
*[https://www.dropbox.com/scl/fi/kb8lcip7b54k6z8actd8j/Key.stl?rlkey=6q665wtswzc2e3ax86mbmbfno&dl=0 Key] | |||
A zip file of all the STLs [https://www.dropbox.com/scl/fi/u478st2k1163ilufqfyta/trunkCam-v1.0.zip?rlkey=q4ysn00zdf6z2ip2sndwk3kcj&dl=0 is available here] | |||
If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the [[Modifications]] page. We review these regularly and will consider integrating with the main design, with attribution to the creator. | |||
There is also a series of [[accessories]] that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs. | |||
Latest revision as of 17:47, 24 June 2026
trunkCam is an open-source hardware project. If you would like to make your own, you will need:
- the parts from the Bill of Materials
- the 3D printed parts listed below. Follow this instructional guide to print your own
The design files for trunkCam are in Fusion, and are viewable and downloadable at this link
3D printable parts:
A zip file of all the STLs is available here
If you have an improvement that you'd like to add to the core design, please share your design file, photo/video of it working, and a description of your improvement on the Modifications page. We review these regularly and will consider integrating with the main design, with attribution to the creator.
There is also a series of accessories that can fit onto the trunkCam to help film in different ways, with design files, photos and STLs.